Two powerful 4500 lumen LED lights with color enhancing COB LED array technology
96 (+/-1) CRI (color rendering index) that mimics natural sunlight
Auto Bright mode adjusts from 10% to 100% (450 to 4500 lumens) to preserve your eye’s natural night vision and extends battery life
Auto Flash Detect mode. Light turns off for 1 second when detecting external flash
One button control for easy operation. One button to power light on/off and select brightness
Five brightness modes: 100%, 75%, 50%, 25% and Auto mode (10% to 100%)
Hidden emergency signal mode. 1 sec blink interval and SOS signal. Push and hold power button for 4 seconds to activate (from off state)
4 hour burn time at 1125 lumens and constant brightness (55 minute burn time at full power)
Easy to expand with YS or Flex-Connect™ mounting system of arms, grips, trays and adapters.
Quick-release button to detach light and aim in crevices and hard to reach areas
120° wide beam angle evenly illuminates the subject with no hot spots.
Depth tested to 330ft (100m)
Corrosion-proof alloy light heads for heat dispersion and durability
Removable 50W Li-Ion batteries w/ chargers and international plug adapters included
|Body Material||Anodized machined aluminum
|Light Source/Bulb Type||1 x COB LED array (COB - Chip On Board)|
|Brightness||4500 lumens (maintains 4500 lumens throughout burn time at full power)|
|Brightness Modes||Full power (100%), 75%, 50%, 25%, and Auto (10%-100%)
|Button Control||Long push (1 sec) to power light on/off; Short push cycles through brightness modes
|Light Modes||Constant light or emergency signal light (activated by long push of power button)
|Color Rendering Index*||96|
|Beam Angle||120 degrees (90-degrees underwater)|
|Battery||Lithium Ion 14.8V, 3400 mAh, 50Wh (included)|
|Battery Charge Time||2 hours 15 minutes|
|Run Time||4 hours at 25% brightness (1125 lumens) and 55 minutes at full power|
|Depth||Tested to 330 feet/100 meters|
5.6" length x 2.4" diameter (14.2cm x 6.1cm), head only
|Weight||17.7oz (503g) head only without battery ; 26oz (737g) head with battery|
|Bulb Life||35,000 hours|
|O-ring||Dual NBR o-rings (lube included)|
*CRI is a measure of a light source's ability to show object colors "realistically" or "naturally" compared to daylight, which has a CRI of 100 and represents the maximum value.
The beam angles for the Sea Dragon lights are shown as the true, tested “in-air” (above water) beam angle. Underwater, due to light refraction, the angle tightens to approximately 33% less.
Avoid using this Sea Dragon light above water for prolonged periods of time
The light is designed for underwater use and water is needed to displace heat. The metal light head at full power will reach temperature of about 140F (60C) degrees within a few minutes, which may cause burning if touched. A thermal sensor will automatically dim the light if internal temperatures reaches 150F (65C) degrees. Immediately turn off light if any parts of the light become hot to the touch.
Two Sea Dragon 4500 Pro UW Photo-Video Light heads Standard YS Mount with slot head screw
Two 50Wh Li-ion rechargeable batteries
Two AC Power Adapters
Two charging trays
Two sets of Int’l plug adapters - US/EU/UK/AU
Two sets of Spare O-rings
Two tubes of O-ring lubricant
Two O-ring removal tools
Two Flex-Connect YS Adapters
Two Flex-Connect Flex Arms
Two Flex-Connect Grips
One Flex-Connect Dual Tray
One SeaLife Pro Duo Case
The DC2000 features a large SONY® 1” type back-illuminated 20MP image sensor, RAW formatting capabilities, full manual controls, and more.
The Micro 2.0 features a high-resolution Sony 16MP Image sensor for razor sharp, colorful still images and full HD video.
Product descriptive text
Use the Flex-Connect Micro Tray to mount a flash or light and add stability to your ultra compact underwater camera
Use the Flex-Connect Flex Arm to extend flashes and lights away from your underwater camera and easily adjust light position
Connects Sea Dragon Lighting to any underwater camera using the 1"/25mm ball joint mounting system.
Connects nearly all brands of lights using 1”/25mm ball mount to Flex-Connect accessories
Product descriptive text
Mount a flash or light directly to the cold shoe of your underwater camera for an ultra compact lighting solution
Easily mount a GoPro® camera to your underwater lighting
The Tray Adapter for Ikelite Housings connects Ikelite camera housings to the Flex-Connect Single or Dual Tray.